Co-Pipe supplies a wide variety of reinforced concrete products, and in a wider selection that includes pipes of diameters from 12” to 144”, and lengths of 8.2’ and 8’. Most products are held in stock on an ongoing basis for immediate availability.

Approximate Mass and Dimension Chart
Joint Details 12" to 36" Diameter Pipe
Joint Details 42" to 120" Diameter Pipe
Precast Concrete Manhole Tee
90° and 45° Bend Dimensions
Curved Alignment Using Radius Pipe
Concrete Pipe Fittings Cored Tees
Culvert End Section

APPROXIMATE MASS AND DIMENSION CHART

We offer a wide variety of sizes when it comes to reinforced pipe.

1. Manufactured in accordance with ASTM C76 specifications
2. All dimensions are in inches, unless otherwise shown
3. Super seal gaskets manufactured in accordance with ASTM C443 specifications

1. Manufactured in accordance with ASTM C76 specifications
2. All dimensions are in inches, unless otherwise shown
3. Super seal gaskets manufactured in accordance with ASTM C443 specifications

1. Manhole tee riser section conform to ASTM C478
2. Concrete pipe conforms to ASTM C76
3. Reinforced as per ASTM C76
4. Manhole to be completed with standard 48" diameter components
5. All dimensions are in inches, unless otherwise shown

1. All dimensions are in inches, unless shown
2. Bends can be manufactured to other angles and dimensions upon request
3. All dimensions are approximate
4. Manufactured in accordance with ASTM C76 and CSA-257.2 specifications

1. Curved alignment is achieved by installing a series of pipe sections that each have a skewed end. These pipe sections, known as radius pipe, are manufactured with a calculated amount of skew (drop) to achieve the desired radius of curvature.
2. The beginning of curve B.C is A, the middle of the last piece of straight pipe before the curve. The end of curve E.C is at the middle of the last piece of radius pipe in the curve.
3. The projections of the joints of the curve do not meet at the center of the curve (radius point). They are tangents of a circle whose center is the radius point, and whose diameter is equal to one radius pipe length.

1. Cored Tees = PVC - 3", 4", 5", 6", 8", 10"
2. Cored Tees available in 27" to 120" pipe lengths in sizes indicated in note 1.
3. Manufactured in accordance with ASTM C76 specifications
4. All dimensions are in inches, unless otherwise shown

1. Concrete shall conform to ASTM C76 class II specifications
2. Reinforcement in "C" section shall conform to ASTM C76 class II specifications for size of connecting pipe
3. Reinforcement in "B" section shall have a cross-sectional area equal to one layer of "C" section
4. The end of pipe culvert shall be placed in the end section so that the flow lines are flush. The joint shall be completely filled with mortar